TL;DR
Get compact home essentials delivered free — and shop member deals
- Fast, free delivery on millions of items
- Access to Prime Big Deal Days deals on October 6–7
- Prime Video, Amazon Music and more included
YouTuber Dy nete Araújo demonstrated a way to turn a large, empty detergent bottle into a toilet paper holder with storage for spare rolls. The project uses a wooden dowel to suspend one roll and the bottle’s lower section to hold extras; the source does not report how durable or widely adopted the design is.
YouTuber Dy nete Araújo demonstrated how to turn a large, empty detergent bottle into a toilet paper holder, with a wooden dowel suspending one roll and the container’s lower section holding spare rolls. The project, described in a report by Hunker, offers a way to reuse a household container for bathroom storage, though the source gives no details about the holder’s durability or use beyond the demonstration.
The design starts with a clean detergent bottle wide enough to fit a toilet paper roll. Hunker says Araújo used a 5-liter container, while noting that a differently shaped bottle of similar size could work. The report gives the width of a standard roll as about 4 1/2 inches and says the bottle needs to be wider than that.
After removing the label and washing the container, the maker marks and cuts away the spout and handle area while leaving plastic at the top to form a curved support. Two aligned holes are cut into that upper section. A wooden dowel passes through the holes and the roll’s center; the bottle’s bottom remains open as a place for additional toilet paper. Hunker recommends cleaning the interior again before putting rolls inside.
The outside can be decorated, but that is optional. The report suggests acrylic paint, contact paper, jute rope, rhinestones or an artificial flower. It says sanding the plastic lightly before applying acrylic paint may help the paint adhere. These are suggestions in the report, not tested results or requirements for the holder to function.
A Second Use for Bulk Detergent Bottles
The project is a small-scale example of reusing household packaging rather than immediately recycling or discarding it. For someone with a suitable bottle, it may also combine two practical functions: keeping a roll ready for use and storing spare toilet paper close by.
The design’s usefulness depends on the available container and the space where it will sit. It is not presented as a substitute for purpose-made bathroom storage, and the source does not compare its cost, stability or lifespan with a basket or commercial holder. Its appeal is chiefly that the main container is being repurposed and can be customized.
DIY toilet paper holder from detergent bottle
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
How the Bottle Becomes a Holder
Hunker’s report frames the project as a way to repurpose an empty detergent bottle and credits YouTuber Dy nete Araújo with sharing the demonstration. It describes a holder with a suspended roll above a lower compartment, rather than a simple container used only to store unopened rolls.
The report notes that Araújo’s 5-liter bottle may not be easy to find and points to a similarly sized detergent container as a possible alternative. The key measurement offered is that the bottle must be wider than a standard roll, given as about 4 1/2 inches. The source does not provide a complete set of dimensions for the cutout or dowel.
“The dowel secures a roll near the top, while the bottom is a spot to keep extras.”
— Hunker’s report on the project
Questions About Fit and Durability
The source does not say how long the plastic holder lasts, whether the dowel stays secure with repeated use, or how stable the finished container is when loaded with rolls. It also gives no exact measurements for the cut shape, hole placement or dowel length, so makers may need to adapt the design to their bottle.
Hunker describes a project and offers decoration ideas, but it does not report a formal test, cost comparison, or feedback from users who have made the holder. The suggestion to use another similarly sized container is guidance, not confirmation that every bottle of that size will work.
Adapt the Design to Your Bottle
No follow-up test or further step from Araújo is reported. For anyone trying the idea, the immediate next step is to check that a cleaned bottle is wider than a toilet paper roll and has enough plastic near the top to support aligned dowel holes. The source does not establish a specific schedule for new updates.
Because the project involves cutting plastic with a sharp tool, careful handling is needed. The report advises drawing the intended shape before cutting; it does not provide a detailed safety guide. Any decorating choices, including paint or adhesive, are optional and should be used according to their product instructions.
Key Questions
What does the detergent-bottle holder store?
It holds one toilet paper roll on a wooden dowel and uses the lower part of the bottle for spare rolls.
What size bottle is needed?
Hunker says Araújo used a 5-liter bottle, but a similarly sized container may work if it is wider than the approximately 4 1/2-inch standard roll described in the report. Exact dimensions for the rest of the design are not given.
Does the holder need to be painted or decorated?
No. Decoration is optional. Hunker suggests paint, contact paper, jute rope, rhinestones or an artificial flower, but the basic design uses the bottle, cutouts and a dowel.
Has the design been tested for durability?
The source does not report durability testing or long-term use. It describes Araújo’s demonstration and does not establish how the holder performs over time.
Source: rss
Halloween Picks
halloween
As an affiliate, we earn on qualifying purchases.
